Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: RRM Ground Wiring Kit

  1. #1
    Join Date
    Nov 2010
    Posts
    272

    RRM Ground Wiring Kit

    Does RRM still sell "ground wiring kits?" I didn't see them on the site.

  2. #2
    Join Date
    May 2011
    Location
    Ottawa, Ontario
    Posts
    1,556
    Just go get welding wire ..and get crimp end connector.. you are done.
    2007AWD auto.212k km..K/N air filter,AUXinput,Grp34size Battery
    Fixes..alternator,swybarlnk,cntrlarm,innertierod,P wiperarm,Rexhaustjnt,Raxleseals,Ujoints,idler,tens ioner pulleys.

  3. #3
    Join Date
    May 2011
    Location
    Dallas, TX
    Posts
    139
    Can someone with know how write up a tutorial or point to a link that explains where to connect ground wires in our cars? I have a 2011 SX4 sportback 6mt

  4. #4
    Join Date
    Nov 2010
    Location
    Oklahoma!
    Posts
    2,104
    Quote Originally Posted by thegeekmeister View Post
    Can someone with know how write up a tutorial or point to a link that explains where to connect ground wires in our cars? I have a 2011 SX4 sportback 6mt
    Here are tutorials I made up several years ago:

    Here's the Auto PDF (18.04mb)
    http://www.web-warp.com/SX4/GWUAuto.pdf
    Here's the Manual PDF (6.54mb)
    http://www.web-warp.com/SX4/GWUManual.pdf


    I don't know if these apply to the newer engines or not.
    If everything isn't identical, at least you'll be able to get the idea.
    The path to heaven runs through miles of clouded hell.

  5. #5
    Join Date
    Nov 2010
    Location
    Oklahoma!
    Posts
    2,104
    Also, Xaviar is on VERY infrequently these days. I wouldn't PM him for advice if I were you, you probably won't hear back from him.
    The path to heaven runs through miles of clouded hell.

  6. #6
    Join Date
    Nov 2010
    Posts
    272
    Thank you, Brumble & Xaviar (wherever ye might be)!

    I researched quite a bit and found many different opinions, as far as wire gauge/type/crimps/etc.

    Please share your recommendations and experiences w/this upgrade.

  7. #7
    Join Date
    Nov 2010
    Location
    Pittsburgh, PA
    Posts
    376
    run 4 gauge from battery to tranny. 8 gauge everywhere else.

    battery



    tranny



    valve cover

  8. #8
    Join Date
    Dec 2011
    Location
    north riverside, il
    Posts
    30
    Good evening, all. Anyone know if Brumbie’s grounding kit was purchased or DIY? I’d like to install the same kit (4 wires) as his? If DIY, anyone know the length size for each wire? Thanks, in advance.
    tech pack, roof rack, hood deflector, front 'skid plate', spoiler w/lip extension, exterior white led's, hyper yellow fog bulbs + yellow vinyl fog lens overlays, 35W 5K HID's, hatch accessory socket mod, 35% tint on windows, Collegiate Edition license plates, Sirius

  9. #9
    Join Date
    Nov 2010
    Location
    Oklahoma!
    Posts
    2,104
    Another forum member on here and I met up and made the cables together.
    The path to heaven runs through miles of clouded hell.

  10. #10
    Join Date
    Dec 2011
    Location
    north riverside, il
    Posts
    30
    Thanx for the response.
    Last edited by _ ikuzus suzuki _; September 3rd, 2018 at 10:16 AM.
    tech pack, roof rack, hood deflector, front 'skid plate', spoiler w/lip extension, exterior white led's, hyper yellow fog bulbs + yellow vinyl fog lens overlays, 35W 5K HID's, hatch accessory socket mod, 35% tint on windows, Collegiate Edition license plates, Sirius

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •