Results 1 to 7 of 7

Thread: FS: 2010+ foldable cargo floor, wheel adapters

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2013
    Location
    Bergen County, NJ
    Posts
    256

    FS: 2010+ foldable cargo floor, wheel adapters

    I'm selling the foldable cargo floor for the 2010+. I'm hoping someone local can pick this up, as it's quite big and heavy. $60.

    PSX_20180708_183932.jpg

    PSX_20180708_183948.jpg

    I'm also selling used Motorsport Tech wheel adapters, 20mm and 25mm. Also very heavy. $40.

    PSX_20180708_184005.jpg

    PSX_20180708_184019.jpg
    Last edited by keviiinn; July 8th, 2018 at 03:41 PM.
    2013 SX4 Crossover w/ Tech, CVT, Pearl White

  2. #2
    Join Date
    Mar 2013
    Location
    Bergen County, NJ
    Posts
    256
    I can attempt to ship these items if there's no one within a reasonable distance. Open to offers.
    2013 SX4 Crossover w/ Tech, CVT, Pearl White

  3. #3
    Join Date
    Aug 2018
    Posts
    1
    What are the adapters exactly? Or are they just spacers?

  4. #4
    Join Date
    Mar 2013
    Location
    Bergen County, NJ
    Posts
    256
    Quote Originally Posted by Sleeka View Post
    What are the adapters exactly? Or are they just spacers?
    Yes, they're spacers. Since they're so thick, at 20mm and 25mm, the right way to do it to make sure the wheels can be bolted onto enough stud length, is to use adapters.
    2013 SX4 Crossover w/ Tech, CVT, Pearl White

  5. #5
    Join Date
    Mar 2013
    Location
    Bergen County, NJ
    Posts
    256
    Foldable trunk floor has been sold. Open to offers on the wheel adapters.
    2013 SX4 Crossover w/ Tech, CVT, Pearl White

  6. #6
    Join Date
    Apr 2013
    Location
    Sherbrooke, Quebec, Canada
    Posts
    1,754
    Quote Originally Posted by keviiinn View Post
    Foldable trunk floor has been sold. Open to offers on the wheel adapters.
    Im looking for spacers with exactly those specs, 20 and 25. Wouldn't these work better with arp extended studs? Not sure how they work
    AWD 2013. CVT. Custom SRI w/Apollo, RRM Crank Pulley, RRM piggyback ecu, Custom 2.25 Flowmaster exhaust, RRM Front/Rear Swaybars, UR Rear Strut bar, Megan Racing Coilovers, Techna-fit brake lines, Projector HID retrofit.

  7. #7
    Join Date
    Mar 2013
    Location
    Bergen County, NJ
    Posts
    256
    I guess extended studs plus regular spacers would give you the same effect. Although you'd have to remove your hubs and then press out the existing studs and press the extended ones in.

    These adapters act as spacers because they bolt onto your existing studs, and they have their own studs. 20 and 25 mm is very thick, so the only way you could safely bolt on your wheels is with adapters with their own studs, rather than just spacers.

    In my pictures, the nuts that you see on the studs are actually used to bolt these on to your existing studs. You would then use the lug nuts to bolt your wheels on to the adapter's studs.

    Link to before and after install

    Link to adapters bolted on to studs (not my picture)
    Last edited by keviiinn; August 21st, 2018 at 08:14 AM.
    2013 SX4 Crossover w/ Tech, CVT, Pearl White

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •