Results 1 to 3 of 3

Thread: Decipher markings on OEM steel wheels

  1. #1
    Join Date
    Aug 2011
    Location
    Boise, ID
    Posts
    404

    Question Decipher markings on OEM steel wheels

    I need to get rid of a set of SX4 base OEM steel wheels. As nobody on the forum has responded to my advert, I need to dump them on Craigslist. Hopefully they could fit other cars too so I want to post as much information as possible on the CL advert.

    My wheels are marked by the rim "J 16x6J DOT 10 10 S6YY12"

    And down by the lug nuts "YY" and later "10" over "05".

    I know what 16x6J means, but does anyone know what the other markings mean?
    Feline mechanics Maggie the moggie and Duke
    2011 SX4 Crossover now sold, 2018 ND Miata and 2023 CX-5

  2. #2
    Join Date
    Nov 2016
    Location
    Toronto, Canada
    Posts
    906
    The offset of these wheels if they are OEM is a +50mm. Your problem with these wheels fitting other vehicles is the fact OEM Suzuki wheels have a small hub bore diameter of 60.1mm. Only other car I know of with that small a hub bore would be Toyota cars.
    10 SX4 6sp AWD, 17 CX-3 AWD
    19 Corvette ZR1
    09 Z06 (gone), 13 Shelby GT500 (gone)

  3. #3
    Join Date
    Aug 2012
    Location
    Manhasset, NY
    Posts
    403
    This might help: https://www.croooober.com/en/blog/fe...-wheel-marking





    SX4 Bolt Pattern PCD 5x114.3

    Stock wheel offset 42 to 50 mm

    Center bore (hub bore) 60.1

    Thread size M12 x 1.25

    Stock Rim Sizes Range 16x7.0 20x8.0

    Tire sizes 195/65 R15, 205/65 R15, 205/60 R16, 225/50 R17, 225/40 R19, 225/30 R20, 225/35 R20
    Last edited by DavidMcC; May 28th, 2023 at 08:37 PM.
    "Life is too important to be taken seriously." - Oscar Wilde
    2010 SX4 Hatchback, CVT, added rear aux power socket, trailer hitch.
    -};>~

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •